Search:

Type: Posts; User: oxygen69

Page 1 of 5 1 2 3 4

Search: Search took 0.04 seconds; generated 55 minute(s) ago.

  1. I would also cover if you need to turn off Intel...

    I would also cover if you need to turn off Intel PROset as well. I know in chanalyzer that can be a real issue for people, or any of the "proprietary" wireless programs.

    Oxygen
  2. Replies
    6
    Views
    6,829

    Yet another customer requesting below -100dBm...

    Yet another customer requesting below -100dBm support.. :)

    Oxy
  3. Replies
    3
    Views
    3,275

    While it doesn't look extraordinarily bad, I see...

    While it doesn't look extraordinarily bad, I see the WIFI jumping channels.. The lines going up and down are probably from your computer, but I would get the WiSpy away from the computer or USB hub...
  4. This may not be the problem, but sometimes WiFi...

    This may not be the problem, but sometimes WiFi card config programs do not allow (on purpose) you to connect to an unsecured/default setting router. It is a security thing.. Maybe try adding an...
  5. Do all the zoomed in images look like the second...

    Do all the zoomed in images look like the second pic? Because the 2nd pic looks a lot like a cordless phone. What Wi-spy are you using?

    I would do a zoomed in image at the lowest step possible...
  6. Thread: Save markers

    by oxygen69
    Replies
    1
    Views
    3,410

    Ditto.. agree'd.

    Ditto.. agree'd.
  7. Replies
    4
    Views
    7,158

    Well the lines are probably in this case an...

    Well the lines are probably in this case an artifact from the USB Spectrum Analyzer. if the range between lines is about 12 MHz then is is just interference inside the WiSpy itself.. IF however...
  8. Possible that it is your card/wifi in the...

    Possible that it is your card/wifi in the laptop.. Maybe it isn't compatible with UNII 2.. I use a Intel 5350 card, and do not have problems seeing anything on a XP with WZC on.. you might try...
  9. Replies
    1
    Views
    3,016

    This could be many things but is just probably...

    This could be many things but is just probably the AP or your card doing it .. There are quite a few other posts on this here too so please look around for them.

    Oxy
  10. You would have to bluetooth or cable connect it...

    You would have to bluetooth or cable connect it to windows first, then inSSIDer should probably see it.. Otherwise if you cannot bluetooth the gps to your computer & a cable is not connectable, it is...
  11. No prob.. happy to help.. :) It took me a...

    No prob.. happy to help.. :)

    It took me a good several months of daily use to get good at using Chanalyzer and the Wi-Spy's so don't feel bad.. In reality SA is a tricky business. Yes, do not...
  12. Replies
    4
    Views
    4,137

    Because there are 2 MAC address's associated with...

    Because there are 2 MAC address's associated with the AP.. not sure if you or someone else changed anything, by that is why it is showing 2 lines.. now if you didn;t do anything, I would be uncertain...
  13. Please turn OFF all WiFi bluetooth ect. on the...

    Please turn OFF all WiFi bluetooth ect. on the computer and any cell phones on your person when doing the scan.

    Please rescan the area in question again and upload the file to this thread.

    I...
  14. Replies
    4
    Views
    4,137

    First and probably only problem is that the dBm...

    First and probably only problem is that the dBm (signal) of the AP is WAY to strong! -27dBm that is your problem.. the computer and AP are SCREAMIING at each other!

    Oxygen
  15. Thread: Weird signal

    by oxygen69
    Replies
    5
    Views
    5,167

    I don't think it is a cordless phone, but...

    I don't think it is a cordless phone, but narrow-band its really hard to identify sometimes.

    Also, get that AP off 802.11n in 2.4GHz! You will keep running into problems! If you want to use...
  16. Yep, that is the WiFi card just rotating through...

    Yep, that is the WiFi card just rotating through to see what channels are free and what's available.. turn off the card and it will go away.. :)

    Oxygen
  17. Replies
    2
    Views
    5,060

    Possible cause is that the router and the laptop...

    Possible cause is that the router and the laptop computer are too close to each other (like screaming at each other).. THe router is compensating by turning the power down on the TX to find a stable...
  18. Replies
    2
    Views
    3,752

    Are you sitting right next to that wireless AP? ...

    Are you sitting right next to that wireless AP? Because you have some really strong signals on there.. You may be seeing leakage from the AP if you are too close to it, also it can not want to...
  19. Replies
    14
    Views
    18,489

    Agree'd you do NOT have anyone on your network.....

    Agree'd you do NOT have anyone on your network.. If he is on a different channel then it is IMPOSSIBLE for him to be using your network. Simple Wireless rules.. you can only use one channel at a...
  20. Replies
    3
    Views
    7,413

    Hard to say.. Could be anything quite frankly.. ...

    Hard to say.. Could be anything quite frankly.. Do you have a recording or image of the entire 800mhz range? I would suggest (if you want to find it) getting a directional for the Wi-Spy and using...
  21. I'd call metageek and inform them of your...

    I'd call metageek and inform them of your situation.. I personally like v3.4 better for many things I do because it was pretty simple. v4 is getting a lot better, but it still cannot record and...
  22. Unfortunately, you must have the newer DBx2...

    Unfortunately, you must have the newer DBx2 WiSpy. Ya, if you upgrade to v4 then the firmware gets upgraded too. If you have the older DBx WiSpy then it cannot upgrade the firmware. Sorry, but...
  23. Well, go to the part of your OS and look at which...

    Well, go to the part of your OS and look at which are connected to (if any). In XP that would be the lower right toolbar at the bottom. Or go to the "Properties" menu in the Network Connections. ...
  24. Make sure "Wireless Zero Config" is enabled in...

    Make sure "Wireless Zero Config" is enabled in services, make sure you START the dell laptop with the wifi card enabled, & change windows to manage the WIFI card.. This should all work..


    Also...
  25. You can't.. Either use the older Chanalyzer 3.4...

    You can't.. Either use the older Chanalyzer 3.4 (which can do this) if your WiSpy 2.4x is not the 2.4x2 or buy Chanalyzer Lab..

    Oxygen
Results 1 to 25 of 125
Page 1 of 5 1 2 3 4