Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 38

Thread: Just installed wi-spy 2.4i 2D works fine - no 3D

  1. #11

    Default Chill, they know about it,

    Chill, they know about it, and are looking into it. They are busy. (Trent, ChiefGeek,[insert Metageek employee name here]) feel free to correct me.

  2. #12

    Default Yes, we're definitely

    Yes, we're definitely working on it. We know the March 2009 release of DirectX corrected some problems with 9.0c, so you may want to try it out. Here's the link:http://www.microsoft.com/downloads/d...splaylang=enIn the mean time, we will continue working on a better solution.Thanks,Steve*

  3. #13

    Default Has anyone got the 3D to

    Has anyone got the 3D to work in Windows Pro SP3? Perhaps if we state which systems it works with, and which it doesn't, that will help narrow down the issue, which seems to be unknown at this point.

    To me it seems like a driver issue. I have a Dell Inspiron 700m laptop, and DirectX works fine, but the 3D View is blank. At first I thought I had a USB conflict, so I uninstalled all my USB drivers and reinstalled, but had the same issue. Anyone have this working?

  4. #14

    Default I just tested on my work

    I just tested on my work notebook, it works for me.

    Windows XP Pro Service Pack 3
    WiSpy 2.4x

    DotNet Versions installed (as listed in add/remove programs)
    1.1
    1.1 Hotfix (KB928366)
    2.0
    3.0

    dxdiag details
    ------------------
    System Information
    ------------------
    Time of this report: 7/7/2009, 11:20:32
    Machine name: NB00034
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp.080413-2111)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Inc.
    System Model: Latitude D630
    BIOS: Phoenix ROM BIOS PLUS Version 1.10 A08
    Processor: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz (2 CPUs)
    Memory: 1014MB RAM
    Page File: 978MB used, 1463MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
    DxDiag Version: 5.03.2600.5512 32bit Unicode

    ---------------
    Display Devices
    ---------------
    Card name: Mobile Intel(R) 965 Express Chipset Family
    Manufacturer: Intel Corporation
    Chip type: Mobile Intel(R) 965 Express Chipset Family
    DAC type: Internal
    Device Key: Enum\PCI\VEN_8086&DEV_2A02&SUBSYS_01F91028 &REV_0C
    Display Memory: 256.0 MB
    Current Mode: 1280 x 800 (32 bit) (60Hz)
    Monitor: Plug and Play Monitor
    Monitor Max Res: 1600,1200
    Driver Name: igxprd32.dll
    Driver Version: 6.14.0010.4831 (English)
    DDI Version: 9 (or higher)
    Driver Attributes: Final Retail
    Driver Date/Size: 5/16/2007 18:14:40, 57344 bytes
    WHQL Logo'd: Yes
    WHQL Date Stamp: n/a
    VDD: n/a
    Mini VDD: igxpmp32.sys
    Mini VDD Date: 5/16/2007 18:14:58, 5707744 bytes
    Device Identifier: {D7B78E66-6942-11CF-4761-F321ADC2CB35}
    Vendor ID: 0x8086
    Device ID: 0x2A02
    SubSys ID: 0x01F91028
    Revision ID: 0x000C
    Revision ID: 0x000C
    Video Accel:
    Deinterlace Caps: n/a
    Registry: OK
    DDraw Status: Enabled
    D3D Status: Enabled
    AGP Status: Not Available
    DDraw Test Result: Not run
    D3D7 Test Result: Not run
    D3D8 Test Result: Not run
    D3D9 Test Result: Not run

  5. #15

    Default I'm having the same problem.

    I'm having the same problem. DirectX 9.0c installed now and verified with dxdiag in run box:

    System:
    XP Home SP3
    DirectX 9.0c

    Symptoms:
    2D works, 3D shows an empty graph.

    Any news on what this is and when it might be fixed? Can we revert to an older DirectX install?

    Mark.

  6. #16

    Default Thanks Steve for this

    Thanks Steve for this constructive comment (not always the case on these public posts...)

    Unfortunately the downloaded DirectX version had no impact.
    I've also upgraded Chanalizer Lite to version 1.0.4.0702 but still no 3D data...

    Do you have such a PC displaying the same problem in your lab? If not and you have some debug tools that one could use to test for you guys please use me!

    Rgs

  7. #17

    Default Tried it on a differnet

    Tried it on a differnet computer, and 3D works as well.

    Windows XP Pro SP3
    WiSpy 2.4x

    DotNet Versions installed (as listed in add/remove programs)
    1.1
    1.1 Hotfix (KB928366)
    2.0 Service Pack 2
    3.0 Service Pack 2
    3.5 SP1

    ------------------
    System Information
    ------------------
    Time of this report: 7/10/2009, 20:38:01
    Machine name: MWP1
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090206-1234)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Inc.
    System Model: Dimension 9100
    BIOS: Phoenix ROM BIOS PLUS Version 1.10 A03
    Processor: Intel(R) Pentium(R) D CPU 3.00GHz (2 CPUs)
    Memory: 1022MB RAM
    Page File: 922MB used, 1533MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
    DxDiag Version: 5.03.2600.5512 32bit Unicode

    ---------------
    Display Devices
    ---------------
    Card name: NVIDIA GeForce 9800 GT
    Manufacturer: NVIDIA
    Chip type: GeForce 9800 GT
    DAC type: Integrated RAMDAC
    Device Key: Enum\PCI\VEN_10DE&DEV_0614&SUBSYS_504019DA &REV_A2
    Display Memory: 512.0 MB
    Current Mode: 1920 x 1200 (32 bit) (60Hz)
    Monitor: Dell 1905FP (Digital)
    Monitor Max Res: 1280,1024
    Driver Name: nv4_disp.dll
    Driver Version: 6.14.0011.7813 (English)
    DDI Version: 9 (or higher)
    Driver Attributes: Final Retail
    Driver Date/Size: 9/17/2008 23:55:00, 6057472 bytes
    WHQL Logo'd: n/a
    WHQL Date Stamp: n/a
    VDD: n/a
    Mini VDD: nv4_mini.sys
    Mini VDD Date: 9/17/2008 23:55:00, 6132576 bytes
    Device Identifier: {D7B71E3E-4554-11CF-EF64-4B7003C2CB35}
    Vendor ID: 0x10DE
    Device ID: 0x0614
    SubSys ID: 0x504019DA
    Revision ID: 0x00A2
    Revision ID: 0x00A2
    Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
    Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    Registry: OK
    DDraw Status: Enabled
    D3D Status: Enabled
    AGP Status: Enabled
    DDraw Test Result: Not run
    D3D7 Test Result: Not run
    D3D8 Test Result: Not run
    D3D9 Test Result: Not run

  8. #18

    Default Hi JL, The only way that we

    Hi JL,The only way that we have re-created this problem is when we had the wrong direct 3D version installed. It has to do with some earlier versions of 9.0c and the managed framework not supporting meshes. When you installed the new version of the direct 3D runtime, did you re-enable the 3D view under the view menu? When you do re-enable, you will have to restart the application.I hope this helps.Steve

  9. #19

    Default Still doesn't display any 3D

    Still doesn't display any 3D data. Here's a shortened dxdiag output.

    Is there any version of Chanalyzer Lite that can be used to grab debug information (command line switch or something)? It's annoying because I have friends that I'd like to show this too so they can get their own Wi-Spy 2.4i, it doesn't give a good impression for you when I tell them one of the main features is broken and that others are having the same problem...

    ------------------
    System Information
    ------------------
    Time of this report: 7/11/2009, 00:25:00
    Machine name: LYNX
    Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.080814-1236)
    Language: English (Regional Setting: English)
    System Manufacturer: TOSHIBA
    System Model: Satellite A30
    BIOS: Phoenix NoteBIOS 4.0 Release 6.0
    Processor: Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz
    Memory: 2014MB RAM
    Page File: 714MB used, 1870MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
    DxDiag Version: 5.03.2600.5512 32bit Unicode

    ------------
    DxDiag Notes
    ------------
    DirectX Files Tab: No problems found.
    Display Tab 1: No problems found. DirectDraw test results: All tests were successful. Direct3D 7 test results: All tests were successful. Direct3D 8 test results: All tests were successful. Direct3D 9 test results: All tests were successful.
    Sound Tab 1: DirectSound test results: All tests were successful.
    Music Tab: No problems found.
    Input Tab: No problems found.
    Network Tab: No problems found.


  10. #20

    Default Just to add, maybe this is

    Just to add, maybe this is relevant but I do not have a Wi-Fi network and the laptop has no W-Fi adapter. I'm using Wi-Spy 2.4i to look for other things in the 2.4GHz band so I can eventually choose a Wi-Fi channel thats as immune to interference as possible.

    Is having no Wi-Fi adapter relevant to 3D viewing?

Page 2 of 4 FirstFirst 1234 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •