Results 1 to 10 of 13

Thread: Bu-353 GPS

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Bu-353 GPS

    Purchased your recommended GPS from your Web page. Installed without issue and confirmed working with the BU-353 GPSinfo utility.

    BU-353 works perfectly with my DeLorme mapping program, but not with inSSIDer.

    When trying to enable in inSSIDer nothing happens, in fact the "ENABLE" check mark disappears after clicking "OK". If I select the wrong COM port, the check mark remains and I'm told "data not detected on COM 3" in the lower right corner. When selecting the correct COM port, 4, nothing happens and "GPS disabled" remains in the lower right corner.

    Any suggestions?

    Win XP Pro SP 3

    Thanks and make it a great day!
    Last edited by RipSaw65; 05-24-2010 at 09:08 AM.

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts