Results 1 to 1 of 1

Thread: WPA2 show as WEP

  1. #1

    Default WPA2 show as WEP

    I have a couple of netgear routers hooked together by an RJ-45 cable.
    Both setup to same SSID one to chan 1 the other to chan 13.
    Both setup for WPA2-PSK [AES] and both show on inSSIDer 2.1 as WEP.
    inSSIDer 2.1 is running on Win7 laptop with broadcaom n adapter.
    What am I missing here ?
    Additional info: iSSIDer for Android does report on network as WPA2 but
    fails completely to see the other router bearing same SSID. It does see
    neighbour routers though.
    Last edited by oferl; 10-02-2012 at 10:42 AM.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts