Results 1 to 2 of 2

Thread: WiFi Channel changes

  1. #1

    Question WiFi Channel changes

    I have a Cisco router, I am using Acrylic to investigate poor reception in some rooms of m apartments. I can see that there are 4 users showing up, my RSSI is -45 which I think is good. There is another network using channel 11, my network says I am using channel 11 + 7 which is the bit I don't get. I have read the instructions from Cisco for my router but I am worried what will happen if I change it from Auto to a manual setting (eg Channel 6) but I don't understand most of the settings that are associated with the channel. Anyone help?

  2. #2
    Join Date
    Feb 2012
    Location
    On the Beach in Florida
    Posts
    393

    Default

    Channel 11 + 7 indicates that bonded (40 MHz) channels are configured. That is not recommended because it consumes most of the 2.4 GHz band which creates lots of interference. 20 MHz channel width is configured in the access point.
    Old Mod by the Sea

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •